OSPF VERIFICATION

R6(config)#do sh ip int brief | e una 

Interface                  IP-Address      OK? Method Status          Protocol 

FastEthernet0/0            116.1.100.6     YES manual up                    up 

FastEthernet0/1            116.1.99.6      YES manual up                    up 

Loopback0                  99.99.6.6       YES manual up                    up 

   
R6(config)#router ospf 1

R6(config-router)#network 0.0.0.0 0.0.0.0 area 20
R6(config-router)#network 116.1.0.0 0.0.255.255 area 10
R6(config-router)#network 116.1.99.6 0.0.0.0 area 0
  
R6#sh run | sec router ospf 
router ospf 1

log-adjacency-changes 
network 11.10.99.6 0.0.0.0 area 0
network 16.1.0.0 0.0.255.255 area 10
network 0.0.0.0 255.255.255.255 area 20

 

R6#sh ip ospf int | i is up|Area 

FastEthernet0/1 is up, line protocol is up 
Internet Address 11.10.99.6/24, Area 0
FastEthernet0/0 is up, line protocol is up 
Internet Address 16.1.100.6/24, Area 10
Loopback0 is up, line protocol is up 
Internet Address 199.199.6.6/24, Area 20